1, Definition and Materials
Hard mold: A hard mold usually refers to a mold that has undergone quenching treatment, and its core material is in an annealed state before mechanical processing. After rough processing, it is quenched to achieve higher hardness and wear resistance. The hardness of hard molds is usually above HRC48 °, with high strength and deformation resistance, suitable for large-scale, high-precision product production.
Soft mold: Soft mold refers to a mold whose core material has been pre hardened and can be used directly without quenching treatment. The hardness of soft molds is relatively low, with HB below 400, but they have good flexibility and elasticity, making them suitable for situations with complex structures, fine patterns, or frequent mold changes. Soft mold materials are mostly steel such as NAK80, and can also refer to silicone rubber molds, which are widely used in new product trials or small-scale production.
2, Production process and cycle
Hard mold: The production process of hard molds is relatively complex, including rough machining, quenching treatment, precision machining (such as CNC and EDM), and subsequent processing (such as polishing or etching). Due to the deformation of the workpiece caused by quenching treatment, a certain amount of machining allowance needs to be retained after rough machining to ensure that the design requirements are met after precision machining. The production cycle of hard molds is relatively long, usually requiring more than 10 days.
Soft mold: In contrast, the production process of soft molds is relatively simple, mainly including precision machining (such as CNC and EDM) and subsequent processing. Due to the pre hardening of the soft mold material, there is no need for quenching treatment, so the production cycle is relatively short and can usually be completed 5 to 8 days in advance. In addition, the soft mold has a shorter cycle and relatively lower cost during mold modification, which is conducive to quickly responding to market changes.
3, Performance characteristics and lifespan
Hard mold: Hard molds have high hardness and wear resistance, can withstand large pressures and impacts, and are suitable for long-term, high load production environments. The lifespan of hard molds is relatively long, generally reaching over 500000 cycles, and even up to 50 million cycles, making them suitable for large-scale production. However, hard molds are difficult and expensive to modify, so they are not suitable for situations where mold modification is frequent.
Soft mold: Although soft mold has low hardness, it has good flexibility and elasticity, and can adapt to the production of complex structural products. Silicone rubber molds have unique forming and demolding properties, making it easy to remove products with complex structures and fine patterns. The lifespan of soft molds is relatively short, generally between 100000 and 300000 cycles, and is suitable for small-scale production or trial production of new products. However, soft molds are relatively easy and cost-effective to modify, which is beneficial for reducing production costs and shortening product development cycles.
4, Application scenarios and costs
Hard mold: Due to its high precision, high wear resistance, and long lifespan, hard molds are widely used in high-precision, large-scale production fields such as automobiles, electronics, and medical devices. In these fields, product quality and stability are crucial, and hard molds can meet long-term and stable production needs. However, the initial investment cost of hard molds is relatively high, and multiple costs such as mold design, material procurement, and manufacturing need to be considered.
Soft mold: Soft molds are widely used in the fields of new product trial production, small batch production, or customized production due to their good flexibility and elasticity, ability to quickly respond to market changes, and lower production costs. Especially in the field of silicone rubber molds, their unique forming reproducibility and demolding performance give soft molds a unique advantage in the production of complex structured products. However, the lifespan of soft molds is relatively short and requires frequent mold replacement, which to some extent increases production costs.
Dec 20, 2024
Leave a message
What is the difference between hard mold and soft mold?
Send Inquiry





