Jul 25, 2024 Leave a message

What are the types of injection molds?

1, Classified by structure
1. Two plate mold
Two plate mold is the most basic type of injection mold, consisting of two main parts: fixed mold and moving mold. This type of mold has a simple structure, low manufacturing cost, and is suitable for producing plastic products with simple shapes and uniform wall thickness. However, due to its single parting surface, the two plate mold is inadequate for products with complex structures or requiring side core pulling.
2. Three plate mold
The three plate mold adds a runner plate (also known as a gate plate) on the basis of the two plate mold, which is used to separate the gate system and the cavity system. This design allows the gate section to be cut independently of the mold cavity, thereby improving the appearance quality and production efficiency of the product. The three plate mold is particularly suitable for the production of products that require a point gate or hot runner system.
3. Hot runner mold
The hot runner mold adopts a heated runner system to keep the plastic melt in a molten state in the runner until it is injected into the mold cavity. This type of mold can significantly reduce material waste, improve production efficiency, and due to the uniform melt temperature, it is conducive to improving the forming quality and surface smoothness of products. Hot runner molds are widely used in the production of high-precision and high-quality plastic products.
2, Classified by molding method
1. Single parting surface mold
A single parting surface mold refers to a mold with only one parting surface. This type of mold has a relatively simple structure and a single opening and closing action, making it suitable for producing plastic products with simple shapes and no side core pulling requirements.
2. Double parting surface mold
The double parting surface mold has two parting surfaces and is usually used for the production of products that require side core pulling or slider mechanisms. By matching two parting surfaces, complex demolding actions of the product can be achieved, ensuring the integrity and quality of the product.
3. Stacking mold
Stacked mold is a special type of injection mold that arranges multiple cavities in layers and produces multiple products simultaneously through a shared injection system and ejection system. This type of mold can significantly improve production efficiency, reduce production costs, and is particularly suitable for large-scale production of small plastic products.
3, Classified by material
The material selection of injection molds has a significant impact on the lifespan, accuracy, and cost of the molds. Common mold materials include steel (such as P20, NAK80, etc.), aluminum alloys, and copper alloys. Steel molds have high strength and wear resistance, making them suitable for producing high-precision and high demand products; Aluminum alloy molds have advantages such as light weight and good thermal conductivity, making them suitable for producing products with high requirements for mold weight and temperature control; Copper alloy molds, on the other hand, have been applied in certain specific fields due to their excellent thermal conductivity and wear resistance.

 

Send Inquiry

Home

Phone

E-mail

Inquiry