Jul 04, 2024 Leave a message

What is the process flow of multiple injection molding?

1. Preliminary preparation
Product design: Based on customer needs and product usage, conduct product design. Determine the shape, size, material requirements, and color matching of the product.
Mold design: Design molds based on product design drawings. The mold should take into account the characteristics of multiple injections to ensure that each injection can proceed smoothly without affecting the effect of the previous injection. After the mold design is completed, it needs to be processed and assembled.
Material preparation: Select suitable plastic materials according to product design requirements. The material should have good compatibility to ensure stable product performance after multiple injection molding. At the same time, it is necessary to perform pre-treatment on the materials, such as drying, impurity removal, etc.
2. Injection molding process
First injection molding: Add pre processed plastic materials to the injection molding machine and set appropriate injection parameters (such as injection temperature, injection pressure, injection speed, etc.). Then, fix the mold on the injection molding machine for the first injection molding. After the first injection molding is completed, it is necessary to wait for the plastic to cool and solidify.
Second and subsequent injection molding: After the first injection molding is completed, perform the second and subsequent injection molding. Before each injection molding, it is necessary to clean the residue inside the mold cavity to ensure the injection molding effect. Meanwhile, suitable plastic materials and colors should be selected according to product design requirements. During the injection molding process, it is necessary to strictly control the injection molding parameters to ensure that each injection molding can achieve the expected effect.
Demolding and trimming: After all injection molding is completed, remove the product from the mold. At this point, the product may have defects such as burrs and burrs, which need to be repaired. After finishing, conduct a preliminary inspection of the product to ensure that its appearance quality meets the requirements.
3. Subsequent processing
Cleaning and drying: Clean the product to remove surface oil and impurities. Then, place the product in a drying room for drying treatment to remove internal moisture and residual solvents.
Assembly and packaging: Assemble multiple components to form a complete product. During the assembly process, it is necessary to ensure the accuracy and stability of the fit between the components. After assembly, package the product to protect it from damage during transportation and storage.
4. Quality inspection
Appearance inspection: Inspect the appearance of the product to ensure that there are no defects such as cracks, bubbles, or deformations. At the same time, check whether the color matching and glossiness of the product meet the requirements.
Size measurement: Use measuring tools to measure the dimensions of the product and ensure that it meets the design requirements. For key dimensions, multiple measurements need to be taken and the average value taken.
Performance testing: Conduct tensile strength, bending strength, impact strength and other performance tests on the product to evaluate whether its physical properties meet the requirements. At the same time, other performance tests such as weather resistance and corrosion resistance are also required.
 

Send Inquiry

Home

Phone

E-mail

Inquiry