1, Structural composition
Two part mold (two plate mold):
The two-part mold is mainly composed of an upper template and a lower template. This mold structure is relatively simple, easy to process and assemble. During the opening and closing process of the mold, the upper and lower templates are precisely aligned through guiding elements such as guide columns and guide sleeves, ensuring the precision and stability of the mold closure.
Three part mold (three plate mold):
Unlike the two-part mold, the three part mold consists of an upper template, a middle template, and a lower template. This mold structure is more complex, but it gives the mold more functionality and flexibility. The introduction of the middle template enables the mold to be divided twice during the opening and closing process, thereby meeting more complex production needs.
2, Working principle
Two part mold:
The working principle of the two-part mold is relatively direct. During the injection molding or forming process, molten plastic or material is injected into the mold cavity, and then the upper and lower templates are clamped and compressed, allowing the material to cool and solidify inside the mold. After the product is formed, the mold is opened and the product is taken out. This mold structure is suitable for producing products with relatively simple production structures and low dimensional accuracy requirements.
Three parts of the mold:
The working principle of the three part mold is even more complex. In the injection molding or forming process, the molten material first enters the flow channel system of the mold, and then enters the mold cavity through structures such as sprues. During the opening and closing process of the mold, the introduction of the middle template enables the gate to automatically separate from the product, thereby improving the appearance quality and production efficiency of the product. In addition, the three plate mold is often used in mold design that requires complex structures such as side core pulling or inclined top.
3, Production efficiency and cost-effectiveness
Production efficiency:
From the perspective of production efficiency, two part molds usually have high production efficiency due to their simple structure and convenient operation. However, when producing products with high precision, high quality, or complex structures, the two parting characteristics and higher flexibility of the three plate mold may make it more efficient in production.
Cost effectiveness:
In terms of cost-effectiveness, the manufacturing cost of the two parts of the mold is relatively low because of its simple structure and low processing difficulty. However, for products that require large-scale production and have high requirements for product size accuracy and appearance quality, although the initial investment is relatively large, the three plate mold may bring higher long-term cost-effectiveness due to its ability to significantly improve product quality and production efficiency.
4, Scope of application
Two part mold:
Two part molds are suitable for producing products with relatively simple structures and low dimensional accuracy requirements. For example, plastic parts of some daily necessities, small electronic product casings, etc. In addition, due to its low manufacturing cost and easy operation, the two-part mold is also commonly used in small-scale production and trial molding stages.
Three parts of the mold:
The three part mold is more suitable for producing high-precision, high-quality, or complex structured products. For example, household appliances, automotive parts, etc. These products have high requirements for dimensional accuracy, appearance quality, and production efficiency, and the two parting characteristics and higher flexibility of the three plate mold can well meet these needs.
Oct 10, 2024
Leave a message
What is the difference between a 2-part mold and a 3-art mold?
Previous
What is a 2 2 cavity mold?Send Inquiry





