1, Pressure forming
Pressure forming is a molding method that uses external pressure to cause plastic deformation of raw materials, thereby obtaining the desired shape and size. It is widely used in the processing of various materials such as metals, plastics, ceramics, etc.
Dry pressing molding
Dry pressing molding is the process of placing powdered or granular raw materials into a mold, applying pressure to tightly bond them and form the desired shape. This method is easy to operate, has high production efficiency, and is suitable for large-scale production. However, due to uneven pressure distribution, there may be internal stresses in the product, which can affect product quality.
Cold isostatic pressing forming
Cold isostatic pressing is the process of placing powder into a flexible mold or package and forming it by applying uniform pressure to it. This method can prepare products with complex shapes and high dimensional accuracy, and the production cost is relatively low. However, cold isostatic pressing equipment is expensive, complex to operate, and requires high particle size distribution and flowability of raw materials.
injection molding
Injection molding is the process of injecting melted plastic into a mold, filling the mold cavity with pressure and solidifying it. This method is suitable for the processing of thermoplastic materials and can produce products with complex shapes and precise dimensions. Injection molding has high production efficiency and good product performance, and is widely used in fields such as automobiles, electronics, and home appliances.
2, Plastic Forming
Plastic forming is a molding method that utilizes the deformation ability of raw materials in a plastic state to obtain the desired shape and size through molds or external forces.
Extrusion molding
Extrusion molding is the process of placing raw materials into the barrel of an extruder, softening them through heating, and then using the thrust of a screw or plunger to extrude them from a mold, resulting in the desired shape of the product. This method is suitable for processing various materials such as metals and plastics, and can produce continuous and large-sized products.
Injection molding (slightly different from injection molding in pressure molding, but belonging to the category of plastic molding)
Injection molding in plastic molding specifically refers to the process of injecting melted plastic into a mold under high pressure, cooling and solidifying it, and then demolding it to obtain the product. This method is not only applicable to thermoplastic plastics, but also to the processing of some thermosetting plastics. Injection molding has the advantages of high production efficiency, high product accuracy, and strong adaptability.
Hot wax casting
Hot wax casting is a method of forming metal products by injecting melted wax material into a mold, cooling it down, removing the wax mold, and then pouring molten metal into the cavity formed by the wax mold. After the metal cools down, the wax mold is removed to obtain the metal product. This method is suitable for manufacturing metal products with complex shapes and fine structures.
3, Slurry forming
Slurry molding is a method of preparing raw materials into slurry or mud, and solidifying it into shape by injecting it into a mold or applying external force.
Slip Casting
Grouting molding is the process of injecting slurry into a mold, distributing the slurry evenly through vibration or centrifugal action, and demolding the product after the slurry solidifies. This method is suitable for processing inorganic non-metallic materials such as ceramics and refractory materials.
Casting molding
Casting molding is the process of passing a slurry with suitable viscosity through the slurry channel of a casting machine onto a base tape, and spreading the slurry through the relative motion of the base tape and scraper to form a smooth surface of the blank. This method is suitable for preparing flat products such as films and sheets.
Gel casting
Gel injection molding is to inject the slurry containing gel agent into the mold and make the slurry gel through chemical reaction to form a green body with certain strength. This method is suitable for preparing ceramic products with complex shapes and high dimensional accuracy.
4, Solid moldless molding
Solid state moldless molding is a molding method that does not rely on molds and prepares products by stacking or scanning cured raw materials layer by layer.
Melting deposition molding (3D printing)
Melt deposition molding is the process of heating and melting filamentous materials, then extruding and solidifying them layer by layer through a nozzle to form a three-dimensional solid product. This method is suitable for the manufacturing of small batches and customized products, and has the advantages of flexible design and short manufacturing cycle.
3D printing molding
3D printing molding is an extended form of melt deposition molding, which uses powdered materials as raw materials, scans and solidifies layer by layer through laser or electron beam, and forms three-dimensional solid products. This method can prepare products with complex structures and fine details.
Laser selection sintering forming
Laser selective sintering molding is achieved by spreading powdered materials on a platform, scanning and sintering them layer by layer using a laser beam, and forming a three-dimensional solid product. This method is suitable for processing various materials such as metals and ceramics, and can produce high-strength and high-precision products.
Oct 23, 2024
Leave a message
What are the four types of molding?
Send Inquiry





