1, Technical principle: Precise synergy from materials to processes
The implementation of mirror polishing injection molds depends on the deep coordination of material selection, surface treatment, and injection molding process:
Optimization of Polishing Performance of Mold Steel
Mold steel with high purity and low impurity content is the foundation. For example, pre hardened steel (such as NAK80) with a sulfur content below 0.005% can avoid the occurrence of "pitting" defects during polishing; High hardness stainless steel (such as HRC52 and above) is subjected to heat treatment to eliminate internal stress, ensuring that the surface flatness error after polishing is ≤ 0.001mm. A leading manufacturer has reduced the non-metallic inclusion content in mold steel by 80% through the use of vacuum melting technology, resulting in a mold life exceeding 2 million times after polishing.
Iteration of Multi level Polishing Process
Mechanical polishing is still the mainstream technology, and its typical process includes:
Rough polishing: Use # 180- # 400 oilstone to remove traces of electrical discharge machining, combined with white leather wheel guide angle;
Semi precision polishing: using a mixture of # 800- # 1500 sandpaper and kerosene to eliminate rough polishing patterns;
Fine polishing: Using 1 μ m diamond grinding paste combined with wool wheels to achieve a Ra0.008 μ m ultra fine surface.
A certain smartwatch manufacturer has reduced the surface roughness of the mold from Ra0.032 μ m to Ra0.016 μ m by introducing ultrasonic assisted polishing technology, which extends the anti fingerprint residual time of the watch case by three times.
Dynamic control of injection molding parameters
The precise matching of mold temperature, injection speed, and holding pressure is crucial. Taking PC material phone back cover as an example:
The mold temperature should be controlled at 120-130 ℃ to avoid stress concentration caused by rapid cooling of the material;
The injection speed is controlled in sections of "high speed low pressure" to prevent the formation of eddy currents in the mold cavity;
The holding pressure is set to 80-100MPa to ensure that the product shrinkage rate remains stable within 0.5%.
A flagship model has reduced the gap tolerance between the back cover and the metal frame from 0.15mm to 0.08mm by optimizing the injection molding process, achieving a seamless fitting effect.
2, Application scenario: Comprehensive penetration from appearance components to functional components
High end smartphones: a dual breakthrough in aesthetics and performance
Transparent back cover: The mirror polished mold makes the PC material back cover have a light transmittance of 92%, combined with nano coating to achieve anti reflection effect. For example, a certain brand's "ultra-thin crystal drill" back cover is made of 0.4mm thick PC injection molded substrate, which achieves military grade drop resistance certification under a body weight of 180g while maintaining impact resistance.
Metal composite structure: Through insert injection molding technology, the composite structure of PC and aluminum alloy frame not only solves the problem of ceramic brittleness, but also reduces the overall cost. The middle frame of a folding screen phone is designed with PC wrapped aluminum alloy, which improves heat dissipation efficiency by 20% and reduces weight by 35% compared to the all metal solution.
Smart wearable devices: a balance between lightweight and functional integration
Watch case: The mirror polished mold makes the surface hardness of the stainless steel case reach 3H, and after surface hardening treatment, the wear resistance is close to glass. The "nano microcrystalline ceramic+PC frame" structure of a certain brand of smartwatch is wrapped around the edge of the ceramic sheet through PC injection molding, which not only retains the heat dissipation performance of the ceramic, but also increases the drop test pass rate from 70% to 95%.
Wireless charging module: pre-set magnetic coil slots and heat dissipation holes in the mold, achieving a charging efficiency of 85%. The PC injection layer thickness of the MagSafe back cover of a certain brand is only 0.3mm, which can still achieve 15N magnetic attraction and support 15W fast charging.
Laptop: The synergy of structural strength and signal penetration
A/C surface shell: The mirror polished mold enhances the impact strength of the ABS+PC alloy shell to 65kJ/m ², which is 40% higher than traditional processes. The "carbon fiber texture+metal wire drawing" composite shell of a certain brand of gaming laptop achieves MIL-STD-810H military certification while maintaining a 1.8kg body weight through the nested design of PC injection molded substrate and metal patches.
Antenna area: By integrating LDS (Laser Direct Molding) technology into the mold, antenna lines are directly molded onto the PC casing, reducing 5G signal transmission loss by 3dB. The antenna efficiency of a flagship laptop has increased from 65% to 82%, supporting dual-mode connection of Wi Fi 6E and Bluetooth 5.3.
3, Industry trend: paradigm upgrade from standardization to customization
The popularization of ultra precision machining technology
With the increasing demand for optical grade injection molding (such as mobile phone camera brackets), the polishing accuracy of molds is transitioning from A1 level (Ra0.016 μ m) to A0 level (Ra0.008 μ m). A certain optical module manufacturer used magnetorheological polishing technology to control the surface waviness of the mold within 0.02 μ m, reducing the imaging distortion rate of the camera bracket from 0.3% to 0.1%.
Deep integration of green manufacturing
The combination of bio based materials and mirror polishing technology is reshaping the industrial ecosystem. PLA material made from corn starch can be injection molded into biodegradable phone cases, reducing carbon emissions by 40% compared to traditional PCs. The "natural leather" back cover launched by a certain brand adopts a bio based PC injection molding bottom support structure, combined with a recyclable TPU frame, achieving a material recycling rate of 92% for the entire machine.
System reconstruction for intelligent production
Digital twin technology is reshaping the mold polishing process. A certain smart factory embedded sensors in the mold to monitor real-time parameters such as temperature, pressure, and cooling efficiency, combined with AI algorithms to optimize the process, reducing the product defect rate from 2% to 0.5%. At the same time, the "dual track" mode of 3D printing and mirror polishing has compressed the new product development cycle from 6 months to 3 weeks, meeting the iterative needs of consumer electronics "monthly updates".
Aug 20, 2025
Leave a message
What are the applications of mirror polishing injection molds in electronic products?
Send Inquiry





