The extrusion die can be described by a metaphor: put a foot-shaped cavity on the bottom plate of the pump, block the air outlet, pull out the piston, install the yellow mud in the cylinder, and insert the piston to suspend the pump to "inflate". Get an extruded "triangle iron". This pump is the extrusion die. In fact, the extrusion die is similar to this, with high strength, using powder metallurgy cemented carbide as the "bottom plate", and using a hydraulic machine to "inflate".
According to the different materials formed, the mold can be divided into metal molds and non-metal molds. Metal molds are divided into: casting molds (nonferrous metal die casting, steel casting), and forging molds; non-metal molds are also divided into: plastic molds and inorganic non-metal molds. According to the different materials of the mold itself, the mold can be divided into: sand mold, metal mold, vacuum mold, paraffin mold and so on. Among them, with the rapid development of polymer plastics, plastic molds are closely related to people's lives. Plastic molds can generally be divided into: injection molding molds, extrusion molding molds, gas-assisted molding molds and so on.





