Apr 15, 2021 Leave a message

Hot Runner Mould

Hot runner mold refers to a mold that uses a heating device to make the melt in the runner never solidify.Because it has a shorter forming cycle than traditional molds and saves raw materials,hot runner molds are widely used in developed countries and regions in the world today.

The hot runner is to ensure that the plastics in the runner and gate remain molten by heating.Because there are heating rods and heating rings near or in the center of the runner,the entire runner from the barrel outlet of the injection molding machine to the gate is in a molten state.The high temperature state keeps the plastic in the flow channet molten.Generally,it is not necessary to open the flow channel to take out the condensate after the machine is shut down,and only need to heat the flow channel to the required temperature when the machine is turned on.In short,the hot runner is the extension of the barrel of the injection molding machine.

Advantage:

1. Shorten the cycle

2. Save plastic material

3. Reduce waste

4. Production automation

Scope of application:

1. Material types:Hot runner molds have been successfully used to process various plastic materials.Such as PP,PE,PS,ABS,PBT,PA,PSU,PC,POM,LCP,PVC,PET,PMMA,PEI,ABS+PC,etc. Any plastic material that can be processed with cold runner molds can be processed with hot runner molds.

2. Size and weight: the smallest part made with hot runner mold is more than 0.1g. The largest is under 30kg. The application is extremely wide and flexible.

3. Industrial field: Hot runner molds are widely used in various industrial sectors such as electronics,automobiles,medical care,daily necessities,toys,packaging,construction,and office equipment.


Send Inquiry

Home

Phone

E-mail

Inquiry