When the injection mold is made into related products，what is the quality of the finished product and what are the quality factors that affect it? Let us look at the related influencing factors when using the injection mold or when making the injection mold. !
First of all，the product design is reasonable，and the best structural scheme is selected. As far as possible，product designers should consider the technical requirements. The product structure must meet the manufacturability and feasibility of mold manufacturing. Mold design is the most important step to improve mold quality. There are many factors to consider，including the choice of mold materials，the availability and safety of mold structures，the processability of mold parts，and the convenience of mold maintenance. These should be in the early stages of design. Think more carefully.
The selection of slippers mold materials should not only meet the customer's requirements for product quality，but also consider the cost and strength of the material setting cycle，and also select materials according to factors such as the type of mold，use mode，processing speed，main failure form and other factors.
For example，the main failure mode of the punching die is edge wear，and materials with high surface hardness and wear resistance should be selected. The stamping die is mainly subjected to cyclic load，which is easy to cause surface fatigue cracks and cause surface peeling. Wire drawing dies should use materials with very low friction coefficient，and die-casting dies should select materials with high thermal fatigue strength according to cyclic thermal stress，which can be used for corrosion-resistant stainless steel. When the product is larger，it can be used for quenching of tempered steel. In addition，it is also necessary to consider the use of mold materials with a small affinity with the manufactured parts to prevent mold parts from wearing out，thereby affecting the quality of the mold.
