In modern industry, most of the molds need to be polished and polished, because polishing can improve the aesthetics of the product, there is a category, in the injection mold mold polishing process industry can also make demolding easier, can promote factory processing, save costs . After the ordinary mold is polished, users need electroplating, which can greatly improve the wear resistance and corrosion resistance of the mold after plating.
The polished product has low surface roughness, high flatness, and high finish, so the surface of the plastic parts produced is brighter, just like the cosmetics on the product.
Mold polishing needs to pay attention to the details: the polishing environment of the mold should be carried out in a clean and ventilated place, because the hard dust can easily damage the plaster when it is drilled on the gypsum, and it will wear a good surface; The other part begins. Each polishing tool is only suitable for one type of drilling plaster, and pay attention to dust.
Each time the drill bit is replaced, the hands and workpiece should be cleaned and the polishing pressure adjusted to match the hardness of the polishing tool and the size of the drilled plaster. For the best drilling plaster, the pressure is only as great as the weight of the polishing tool.
